ASME B16[1].36-1996
|
ID： |
7483C4014AF142628251E7ED70605CF4 |
|
文件大小(MB)： |
0.93 |
|
页数： |
27 |
|
文件格式： |
|
|
日期： |
2013-6-1 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
INDD BZb.36 88 - 2595512 0078093 T48 -,ASME-B16.36,ADOPTION NOTICE,ASME-B16.36, "Flanges, Orifice," was adopted on October 3,1994 for use by the Department of Defense (DOD). Proposed,changes by DOD activities must be submitted to the DOD,Adopting Activity: Commanding Officer, Naval Construction,Battalion Center, Code 156, 1000 23rd Avenue, Port Hueneme,CA 93043-4301. DOD activities may obtain copies of this,standard from the Standardization Document Order Desk, 700,Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.,The private sector and other Government agencies may,purchase copies from the American Society of Mechanical,Engineers, 345 East 47th Street, New York, NY 10017.,Custodians:,Army - ME,Navy - YD-1,Air Force - 99,Adopting Activity,Navy - YD-1,.,FSC 4730,DISTRIBUTION STATEMENT A. Approved for public release;,distribution is unlimited.,COPYRIGHT American Society of Mechanical Engineers,Licensed by Information Handling Services,COPYRIGHT American Society of Mechanical Engineers,Licensed by Information Handling Services,~~ -,STD-ASME Blb-3b-ENGL L77b - 0757b70 0577272 980,The American Society of,Mechanical Engineers,A N A M E R I C A N N A T I O N A L S T A N D A R D,ORIFICE LANCES,.,ASME B16.36-1996,(Revision of ASMVANSI B16.36-1988),COPYRIGHT American Society of Mechanical Engineers,Licensed by Information Handling Services, STD-ASME BLb-3b-ENGL L77b 0757b70 0577273 AL7,Date of Issuance: January 31, 1997,The 1996 edition of this Standard is being issued with an automatic addenda,subscription service. The use of an addenda allows revisions made in response,to public review comments or committee actions to be published as necessary;,revisions published in addenda will become effective 6 months after the Date,of Issuance of the addenda. The next edition of this Standard is scheduled for,publication in 2001.,ASME issues written replies to inquiries concerning interpretations of technical,aspects of this Standard. The interpretations will be included with the above,addenda service. Interpretations are not part of the addenda to the Standard.,ASME is the registered trademark of the American Society of Mechanical Engineers.,This code or standard was developed under procedures accredited as meeting the criteria for,American National Standards. The Consensus Committee that approved the code or standard was,balanced to assure that individuals from competent and concerned interests have had an,opportunity to participate. The proposed code or standard was made available for public review,and comment which provides an opportunity for additional public input from industry, academia,regulatory agencies, and the public-at-large.,ASME does not "approve," "rate," or "endorse" any item, construction, proprietary device, or,activity.,ASME does not take any position with respect to the validity of any patent rights asserted in,connection with any items mentioned in this document, and does not undertake to insure anyone,utilizing a standard against liability for infringement of any applicable Letters Patent, nor assume,any such liability. Users of a code or standard are expressly advised that determination of the,validity of any such patent rights, and the risk of infringement of such rights, is entirely their own,responsibility.,Participation by federal agency representative(s1 or person(s) affiliated with industry is not to be,interpreted as government or industry endorsement of this code or standard.,ASME accepts responsibility for only those interpretations issued in accordance with governing,ASME procedures and policies which preclude the issuance of interpretations by individual,volunteers.,No part of this document may be reproduced in any form,in an electronic retrieval system or otherwise,without the prior written permission of the publisher.,The American Society of Mechanical Engineers,345 East 47th Street, New York, NY 10017,Copyright Q 1997 by,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,All Rights Reserved,Printed in U.S.A.,COPYRIGHT American Society of Mechanical Engineers,Licensed by Information Handling Services,FOREWORD,(This Foreword is not part of ASME 616.36-1996.),August of 1956 marked the first recorded correspondence noting the lack of standardization,for orifice flanges. There were, and still are, several codes for the performance and calibration,of orifice flanges, but there had been no standardization of the flanges themselves. Over,the ensuing 3 years, correspondence continued among the Instrument Society of America,American Gas Association, and the B 16 Standards Committee.,On December 3, 1959, Subcommittee 3 (now Subcommittee C) of B16 authorized the,app……
……